Storitve
EXEM steel
EXEM steel is engineered for superior machinability.
Produced using a proprietary manufacturing process, it transforms hard inclusions into softer compounds that significantly reduce tool wear during machining.
This enables cutting speeds of up to 50% higher or, at unchanged cutting speeds, extends tool life by up to four times.
Every batch is machinability-tested before shipment to ensure consistent performance, while the excellent machining properties are retained even after hot forming.
Case-hardening EXEM grades
| EN oznaka | W.Nr. | EN proizvodni standard | DIN | Drugo |
|---|---|---|---|---|
| C10 EXEM | 1.0301 | EN 10277-2 | C10 EXEM | AISI/SAE 1011 |
| C15 EXEM | 1.0401 | EN 10277-2 | C15 EXEM | - |
| C15R EXEM | 1.1140 | EN 10084 | Cm15 EXEM | |
| 16MnCrS5 EXEM | 1.7139 | EN 10084 | 16MnCrS5 EXEM | - |
| 16NiCrS4 EXEM | 1.5715 | EN 10084 | - | SAE 3115 |
| 17NiCrMoS6-4 EXEM | 1.6569 | EN 10084 | - | UNI 7846 |
| 18CrNiMo7-6 EXEM | 1.6587 | EN 10084 | 17CrNiMo6 EXEM | - |
| 20MnCr5 EXEM | 1.7147 | EN 10084 | 20MnCr5 EXEM | - |
| 20MnCrS5 EXEM | 1.7149 | EN 10084 | - | - |
| 20NiCrMo2-2 EXEM | 1.6523 | EN 10084 | 21NiCrMo2 EXEM | - |
| 20NiCrMoS2-2 EXEM | 1.6526 | EN 10084 | 20NiCrMoS2-2 EXEM | - |
Forging EXEM grades
| EN oznaka | W.Nr. | EN proizvodni standard | DIN | Drugo |
|---|---|---|---|---|
| 20MnV6 EXEM | 1.5217 | EN 10267 | - | - |
| 30MnB4+Ti EXEM | 1.5526 mod. | EN 10263 | - | - |
| 30MnVS6 EXEM | 1.1302 | EN 10267 | - | - |
| 33MnCrB5 EXEM | 1.7185 | EN 10083-3 | ISO 683-2 | - |
| 38MnVS6 EXEM | 1.1303 | EN 10267 | - | - |
Quenching & tempering EXEM grades
| EN oznaka | W.Nr. | EN proizvodni standard | DIN | Drugo |
|---|---|---|---|---|
| C22 EXEM | 1.0402 | EN 10084 | C22 EXEM | AISI/SAE 1020 EXEM |
| C22R EXEM | 1.1149 | EN 10083-2 | Cm22 EXEM | |
| C35 EXEM | 1.0501 | EN 10083-2 | C35 EXEM | AISI/SAE 1035 |
| C35R EXEM | 1.1180 | EN 10083-2 | Cm35 EXEM | AISI/SAE 1035 |
| C40R EXEM | 1.1189 | EN 10083-2 | Cm40 EXEM | AISI/SAE 1040 EXEM |
| C45 EXEM | 1.0503 | EN 10083-2 | C45 EXEM | AISI/SAE 1042 EXEM |
| C45R EXEM | 1.1201 | EN 10083-2 | Cm45 EXEM | AISI/SAE 1045 EXEM |
| C50 EXEM | 1.1206 | EN 10083-2 | C50 EXEM | AISI/SAE 1049 EXEM |
| C60 EXEM | 1.1223 | EN 10083-2 | C60 EXEM | AISI/SAE 1060 EXEM |
| 25CrMo4 EXEM | 1.7218 | EN 10083-3 | 25CrMo4 EXEM | AISI/SAE 4130 |
| 25CrMoS4 EXEM | 1.7213 | EN 10083-3 | 25CrMoS4 EXEM | - |
| 30CrNiMo8 EXEM | 1.6580 | EN 10083-3 | 30CrNiMo8 EXEM | - |
| 39NiCrMoS3 EXEM | 1.6510 | EN 10083-3 | 39NiCrMoS3 EXEM | - |
| 41Cr4 EXEM | 1.7035 | EN 10083-3 | 41Cr4 EXEM | |
| 41CrS4 EXEM | 1.7039 | EN 10083-3 | 41CrS4 EXEM | - |
| 42CrMo4 EXEM | 1.7225 | EN 10083-3 | 42CrMo4 EXEM | AISI/SAE 4140 |
| 42CrMoS4 EXEM | 1.7227 | EN 10083-3 | 42CrMoS4 EXEM | AISI/SAE 4140 |
EXEM Spring and Structural Steel grades
| EN oznaka | W.Nr. | EN proizvodni standard | DIN | Drugo |
|---|---|---|---|---|
| 51CrV4 EXEM | 1.8159 | EN 10089 | 51CrV4 EXEM | - |
| S235JR EXEM | 1.0038 | EN 10025-2 | St-37-2 EXEM | Gr. 36 EXEM |
| S355J2 EXEM | 1.0570 | EN 10025-2 | St 52-3N EXEM | A656 |
Find your regional contact
Darko Bojović
Area sales manager (ex-YU, SLO, Balkans, CZ, SK, PL, Baltics)
darko.bojovic@store-steel.si
Contact our head of sales
