Product shapes

Our steel products are supplied in a range of hot rolled and peeled shapes designed to meet the requirements of further machining, heat treatment, and industrial processing operations.

Depending on the steel grade and application, the products are available in different cross-sectional forms, dimensional ranges, and surface conditions.

Dimensional tolerances and surface conditions are selected according to customer requirements and the intended application.

The following table provides an overview of the available product shapes and dimensional ranges.

Round Bars

CROSS-SECTION	STANDARD	DIMENSIONS (mm)
	EN 10060 As rolled condition	D20–50.5 (step: 0.5 mm), D51–58 (step: 1 mm), D60, 62.5, 65, 68.5, 70, 72, 75, 77.5, 80, 83, 85, 90, 95, 100, 105
	EN 10278 Peeled to h11 tolerance	D18–105
	EN 10278 Peeled to h9 tolerance	D18–100

*other dimensions available upon request

Flats

CROSS-SECTION	STANDARD	DIMENSIONS (mm)
	EN 10058	50–200 × 8–62
	EN 10092-1A	60–150 × 8–36
	EN 10092-1B	50–200 × 8–35
	EN 10092-1C	60–120 × 14–67
	EN 10092-2	120 × 12–20
	EN 10089	60–120 × 27–42

*other dimensions available upon request

Square Bars

CROSS-SECTION	STANDARD	DIMENSIONS (mm)
	Square bars with round edges EN 10059	40 × 40 / R = 6 45 × 45 / R = 6 50 × 50 / R = 6 55 × 55 / R = 8 60 × 60 / R = 10 65 × 65 / R = 10 70 × 70 / R = 10 80 × 80 / R = 12

CROSS-SECTION

STANDARD

DIMENSIONS (mm)

Square bars with round edges

EN 10059

40 × 40 / R = 6
45 × 45 / R = 6
50 × 50 / R = 6
55 × 55 / R = 8
60 × 60 / R = 10
65 × 65 / R = 10
70 × 70 / R = 10
80 × 80 / R = 12

*other dimensions available upon request