Services
Value-added processing services
Steel, processed to fit your production requirements
To support efficient downstream manufacturing, we provide a range of value-added processing services tailored to your requirements.
These services help reduce additional processing steps, improve production efficiency, and ensure that products are delivered in the required condition for subsequent manufacturing operations.
Products peeled as delivery condition
Cutting to length
Precision cutting according to customer requirements.
Parameter |
Specification |
|---|---|
Diameter |
Ø18–90 mm |
Length |
300–2,000 mm |
Length tolerance |
±1 mm |
Chamfering
Preparation of bar ends for improved handling and downstream processing.
Parameter |
Specification |
|---|---|
Diameter |
Ø18–90 mm |
Bar length |
3.0–6.5 m |
Chamfer angle |
30°, 45°, 60° |
Preparation for Cold forging
Precision cut billets for cold forging applications.
Parameter |
Specification |
|---|---|
Diameter |
Ø20–100 mm |
Maximum piece weight |
3.5 kg |
Weight tolerance |
±1 g |
100% surface inspection
Automated inspection of peeled bars for surface imperfections.
Parameter |
Specification |
|---|---|
Diameter |
Ø18–90 mm |
Bar length |
3.0–8.0 m |
Minimum detectable defect depth |
0.10 mm |
Products as rolled delivery condition
Cutting to length - Flat bars
Parameter |
Specification |
|---|---|
Length |
750–7,200 mm |
Tolerance |
−0 / +5 mm |
Cutting to length - Round Bars
Parameter |
Specification |
|---|---|
Length |
2,900–4,200 mm |
Length |
5,600–8,300 mm |
Tolerance |
±10 mm |
End cropping
Removal of bar ends according to customer requirements.
Parameter |
Specification |
|---|---|
Length |
750–9,200 mm |
Tolerance |
−0 / +20 mm |
Heat treatment
Heat treatment services available according to product and customer requirements.
- Soft annealing
- Spheroidize annealing
- Stress relieving
- Normalizing
- Annealing for improved machinability
100% inspection
Automated inspection for material mix-up, surface defects, and internal imperfections.
Parameter |
Specification |
|---|---|
Diameter |
Ø20–100 mm |
Minimum detectable surface defect depth |
0.20 mm |
Inspection speed |
0.2–2.0 m/s |
Find your regional contact
Darko Bojović
Area sales manager (ex-YU, SLO, Balkans, CZ, SK, PL, Baltics)
darko.bojovic@store-steel.si
